Many parents take their children to indoor playgrounds. Slides are one of the children's favorite activities. However, slides become non-slip after being slid many times. how to make a plastic slide slippery？we can start from the surface treatment of the diy slip slide reduce friction, replace the slide material, regular maintenance and controlof environmental factors. The following are the specific methods:
Slide Smoothing
Grinding and Polishing
We can use sandpaper, grinders and other tools to polish the surface of the plastic slide, smooth out the burrs, bumps and uneven areas on the surface, and make the slide surface smooth.
Slide Lubricant
We can apply an appropriate amount of lubricant on the surface of theplastic slide for playground， such as vaseline, paraffin, olive oil, baby oil or vegetable oil-specific slide lubricant. Let a smooth protective film form on the surface of the slide, reduce friction and make the slide more slippery.
Reduce the friction of the slide
Increase the angle of the slide
Appropriately adjust the angle of plastic slide for playground . Increasing the inclination angle of the slide can make it easier for children to slide down, but be careful not to make the angle too large. A large angle will reduce the friction and affect the safety of children.
Change the shape of the slide
Adjust the shape design of the diy playground slide to ensure that it has no overly sharp corners or places with excessive curvature. You can also round the edges of the slide to avoid scratches on children.
Slide repair and maintenance
Cleaning the slide
Regularly clean the dust, dirt, leaves and other debris on the surface of the slide. For stubborn stains, we can use mild detergents such as detergent and soap to wipe.
Check the slide
how to patch bounce house？Regularly check the various parts of the slide to ensure that they are stable and not loose or deformed. If they are loose, replace them in time. If the slide does not slide, we can change the slope and shape of the slide to increase friction.
Slide material selection
Smooth material
If conditions permit, you can consider changing the material of the slide to a smoother material. plastic sliding boards are not as naturally smooth as stainless steel slides, and the friction coefficient is lower, which makes the slide more slippery. In addition, fiberglass material also has good smoothness and corrosion resistance and can also be used to make slides.
Add a smooth pad
Adding a smooth pad to the surface of the slide, such as plastic film, rubber pad, etc., can provide additional smoothness, reduce the friction between the human body and the slide, and also play a certain buffering role, which is safer for children to play.
Control the slide environment
Keep it dry
Moisture will increase the friction of the slide surface, so we need to keep the slide surface dry. If it rains, we should use a canopy, anti-slip mat or waterproof cloth to cover the childrens plastic slideto prevent it from getting wet. If there are water stains on the childrens plastic slide surface.use bounce house blowers wipe it dry with a dry cloth in time.
Control the temperature
Temperature also has a certain effect on the smoothness of the slide. The friction of the childrens plastic slide surface will increase on cold days, so we keep the temperature within a suitable range to keep the slide smooth.
The above are some convenient ways I have listed for you to make the plastic slide more slippery. You can refer to these methods to practice them. I hope they will be helpful to you. Also if you want to but a fun slide for your backyard or playground, contact us to get the newest design and quotation!
