Do you want to have your own basketball stand so you can shoot at any time? We gave up because the basketball stand was difficult to install and we were worried about the high cost of hiring someone to install it. Don't worry! As long as you master the installation knowledge, the problem will be solved. Here is an introduction to the installation method of the ground basketball stand. Follow the steps to have your own basketball stand.
Steps to installbasketball hoops in the ground
Choose a basketball stand
Choose a ground basketball stand that is reliable and meets the standards according to the usage scenario and needs. Common ones include hydraulic basketball stands and manual basketball stands.
Determine the location
Choose a flat, open, obstacle-free venue, such as a school playground, a community leisure area, etc. Make sure there is enough space around to avoid collisions between players during exercise.
Prepare tools
The tools you need to prepare include electric drills, wrenches, screwdrivers, levels, tape measures, etc., and materials include expansion bolts, concrete, etc
Basketball hoop install
Assemble the components according to the instructions of the basketball stand. Usually, assemble the backboard first, then basketball net install and bracket. During the assembly process, make sure that the components are firmly connected and the screws are tightened.
Determine the installation point
Use a tape measure and a level to determine the installation position of the diy basketball hoop stand on the ground and mark the installation hole position of the expansion bolt.
Drilling
Use an electric drill to drill holes at the marked positions. The depth and diameter of the drilling should be determined according to the specifications of the expansion bolt. Generally, the depth should be slightly deeper than the length of the expansion bolt to ensure that the bolt can be fully embedded in the ground.
Install the bolts
Put the expansion bolts into the holes and tighten the bolts with a wrench. When tightening the bolts, pay attention to maintaining the verticality of the bolts to avoid the inclination of the bolts affecting the stability of the basketball stand.
Basketball hoop set up
Place the assembled basketball stand base in the installation position so that the expansion bolts pass through the installation holes of the base. Then use nuts to fix the base and expansion bolts together, tighten the nuts, and ensure that the base is firmly fixed to the ground.
Adjust the basketball stand
Use a level to check the verticality and horizontality of the basketball stand. If there is any deviation, adjust it by adjusting the gasket under the base or retightening the bolts until the basketball stand reaches a horizontal and vertical state.
Pouring concrete
If the basketball stand requires high stability, you can pour concrete around the base. First, dig a pit of appropriate depth and width around the base, then pour concrete into the pit and tamp the concrete with tools to make it tightly combined with the base. After the concrete is poured, wait for it to fully solidify, which generally takes 24-48 hours.
Complete installation
After the concrete solidifies, check the stability of the basketball stand and the connection of each component again to ensure that the basketball stand is firmly installed. Then you can make final adjustments to the basketball stand, such as adjusting the height of the basket and checking the flatness of the backboard.
Why for asking professionals to install basketball stands
Ensure safety
Professionals are familiar with the installation process and safety regulations of basketball stands, and can correctly install various components to ensure the stability and firmness of basketball stands. Ensure that the basketball stands will not fall due to external forces during use, thereby avoiding harm to users.
Installation quality
Professionals have rich installation experience and professional skills, can complete the installation work quickly and efficiently, and can ensure the quality of installation. Ensure that the basketball stands meet the standard requirements and provide users with a good experience.
Avoid damage
Professionals understand the structure and characteristics of basketball stands, and can avoid damage to the basketball stands due to improper operation during the installation process, thereby extending the service life of the basketball stands.
Provide professional advice
Professional installers can not only complete the installation of basketball stands, but also provide professional advice to users based on site conditions, usage requirements and other factors. They can provide knowledge about the maintenance and care of basketball stands, as well as answer questions encountered by users during use.
Save time
For people who have no installation experience, it may take a lot of time and energy to encounter various problems during the installation process. Asking professionals to install can save users' time and energy, allowing users to use basketball stands faster.
If you want to buy a basketball stand? Come to the official website of tongle amusement equipment, we can serve you from selecting equipment to arranging professional installation. If you have any questions, you can contact us to answer them for you.
